Material Handler | Spec 75

 Regular Cab & Chassis w/22′ Platform Body, Crane, Grapple, Magnet & Railgear

Bodies

Rail/Tie Bed

  • 22’6” X 102” Platform
  • 24’6” Also Available
  • 3/16 AR450 Single Sheet Floor
  • Heavy Duty Front & Rear Bulkheads
  • Rail Racks on Top of Bulkheads
  • 8-40” Removable Vertical Side Post
  • Removable Synthetic Plank Sides
  • 6-Material Tie Down Winches & Straps
  • Slide Out Ladder on Front Street Side

 Tie Bed

  • 22’6” X 102” Platform
  • 24’6” Also Available
  • 3/16 AR450 Single Sheet Floor
  • Heavy Duty Loggers Headboard & Rear Bulkhead
  • 8-40” Removable Vertical Side Post
  • Stake Storage Pocket Located on Back of Bed
  • 6-Material Tie Down Winches & Straps
  • Slide Out Ladder on Front Street Side

Cranes

Palfinger Epsilon M13A80

  • 21’2” Boom Extending Out to 26’ 5”
  • Also Available 21’ 2”Boom Extending Out to 32’
  • 9,040 lb Capacity @ 10’
  • Continuous Rotation
  • Crane Seat at Top of Crane Mast
  • Side Access Ladders
  • Hydraulic A-Frame Outriggers
  • Oversized Outrigger Pads
  • Fold Down Ladder Extensions
  • High Idle & Engine Kill Switch at Top Seat
  • Cold Weather Package w/Folding Canopy, Heated Seat & Handles

Robotech Elite

  • 22’ Boom Extending Out to 25’ 5”
  • 8,558 lb Capacity @ 10’
  • Continuous Rotation
  • Crane Seat at Top of Crane Mast
  • Side Access Ladders
  • Hydraulic A-Frame Outriggers
  • Oversized Outrigger Pads
  • Fold Down Ladder Extensions
  • High Idle & Engine Kill Switch at Top Seat

Grapples

Heiden HC20-AHR-3

  • Bypass or Butt Type
  • Holding Valves on Hydraulic Cylinders
  • Continuous Rotation
  • 1.5” Heavy Duty Tines
  • 1/3 cord

Rotobec

  • Bypass or Butt Type
  • Holding Valves on Hydraulic Cylinders
  • Continuous Rotation
  • 1.5” Heavy Duty Tines
  • 1/3 cord

 

Railgear

  • Hydraulic Operation
  • Front Brakes

 

  • Front & Rear Rail Sweeps
  • Manual Pin Offs

 

  • Track Tested
  • Annual FRA Inspection

Magnets

12/24 Moley Magnet

  • 32” Magnet Head
  • 2 Batteries Added to Truck Just For Magnet
  • Batteries Charge Off the Chassis Charging System
  • Collector Ring Added to Allow Continuous Rotation w/Magnet

 

  • Joystick Added w/Switch, Pilot Light & Trigger
  • 75% Duty Cycle

V&H Generator Magnet

  • 230V DC, 14 Amp
  • 5kw DC Generator

 

  • Hubbel Magnet Controller
  • Joystick Added w/Switch, Pilot Light & Trigger
  • Collector Ring Added to Allow Continuous Rotation w/Magnet
  • 32” Magnet Head
  • 75% Duty Cycle

 

Drive Systems

V&H Remote Drive

  • Air Cylinder in Cab Will Depress & Release Clutch
  • Air Cylinder will Shift Truck From 1st Gear to Reverse
  • Trigger on Loader Joystick Will Release Brake After Depressed & Held
  • After Brake is Released Forward or Reverse Buttons Can be Pressed
  • Pressure Switch in Seat to Dectect Operator is Present

 

 

  • Prox Switch on Stabilizers to Detect They Are in Transport Position
  • Emergency Stop Button Will Shut Down Remote Drive System

V&H Hydrostatic Creep Drive

  • Split Shaft PTO Gear Box Added to Drive Line
  • 5 Speeds Forward (0-5 mph)
  • 5 Speeds Reverse (0-5 mph)

 

  • Trigger on Loader Joystick Will Realease Brake After Depressed & Hold
  • After Brake is Released Forward or Reverse Buttons Can Be Pressed
  • Pressure Switch in Seat to Detect Operator is Present
  • Prox Switch on Stabilizers to Detect They Are in Transport Position
  • Emergency Stop Button Will Shut Down Creep Drive System

Hitch Options

Train Air

  • 1” Plate Added to Rear of Truck for Train Coupler
  • Train Coupler is Removable
  • 40-Ton Pintle Can Be Added in Place of Train Coupler
  • 1 3/8” Air Line to Operate Train Brakes
  • Air Supplied by Chassis Air System

 

40-Ton Pintle Hitch

  • 1” Pintle Plate Added to Rear of Truck
  • Air Glad Hands Mounted at Rear of Truck
  • 24” Standard Height (Middle of Throat)

Accessories

  • 24 x 24 x 48 Diamond Plate Tool Box
  • Oil Cooler w/50 Gallon Hydraulic Tank
  • Flashing Light System
  • Backup Alarm
  • Triangle Reflector Kit
  • Fire Extinguisher, Mounted in Cab
  • Grip Strut Steps Under Cab Steps
  • Decals
  • DOPT Inspection
  • Mud Flaps

Chassis Specs

  • 13 Liter 470 hp 1,650 ft/lbs of Torque
  • Jacobs Compression Brake
  • Block Heater
  • Manual Transmission
  • 20,000 lbs Front Axle & Suspension
  • Steer Tires 425/65R22.5
  • 46,000 lbs Rear Axle & Suspension
  • 11R 22.5 Drive Tires
  • 66,000 GVW
  • Full Double Frame
  • 24” Integral Front Frame Extension
  • AM/FM/WB w/CD Player, Bluetooth & Microphone
  • Pre Wired for CB in Overhead Console
  • Air Conditioning
  • 12-Volt Power Supply in Dash
  • Cruise Control
  • Power Window on Passenger Side, Manual Crank on Driver Side
  • 80-Gallon Polished Aluminum Fuel Tank
  • 13-Gallon Diesel Exhaust Fluid Tank
  • LED Marker Lights
  • Air Ride Cab Mounts
  • Premium High Back Air Ride Drivers Seat

Equipment Options

Note: Some equipment options are not compatible with each other. Please ask for assistance when choosing options.

  • Shunt System for Railgear
  • Electric Brake Controller
  • Tool Boxes
  • Work/Driving Lights on Front of Truck

Time To Build Your V&H Work Ready Truck?

Contact a sales professional to discuss your needs today! Then let our team begin the process
of designing and building the heavy-duty work truck that will get the tough jobs done for you.

Call (800) 826-2308 to get started

Inventory

Back To Top